Float Tank Plans

Please download to get full document.

View again

of 16
7 views
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Download

Document Related
Document Description
Float Tank Plans Copyright 2006 All Rights Reserved Tank Material list: 5 4x8 sheets ½” Plywood 5 4x8 sheets ¼” Plywood 5 4x8 sheets 1 ½” Rigid Styrofoam 24 8’ 2 x 2’s (1 ½” x 1 ½” actual dimensions) 1 Door Handle 3 4’ 2 x 4 1 4’ 2 x 6 1 ½” wood screws 1 Piano Hinge for door 3 8’ 2” x ½” cedar strips for liner 1 30 mil vinyl liner 42 ½” by 90 ½” by 18” high (available at swimming pool supply stores) 1 Waterbed Heater (make sure heater has cord that plugs into Control box so it can be fed throu
Document Share
Document Tags
Document Transcript
  Float Tank Plans  Copyright 2006 All Rights Reserved   Tank Material list:5 4x8 sheets ½” Plywood5 4x8 sheets ¼” Plywood5 4x8 sheets 1 ½” Rigid Styrofoam24 8’ 2 x 2’s (1 ½” x 1 ½” actual dimensions)1 Door Handle3 4’ 2 x 41 4’ 2 x 61 ½” wood screws1 Piano Hinge for door3 8’ 2” x ½” cedar strips for liner1 30 mil vinyl liner 42 ½” by 90 ½” by 18” high (available at swimmingpool supply stores)1 Waterbed Heater(make sure heater has cord that plugs into Control box so it can be fedthrough hole in tank)1 1/2 horse Jacuzzi Pump1 Timer switch for pump1 25 Square Foot Cartridge Filter8’ to 10’ 1 ½” PVC PipeVarious PVC fittings depending on your style of pump and filter1 Ground Fault Interrupter (GFI) Breaker1 Ground Fault Interrupter (GFI) Plug1 Gallon High Grade Exterior Paint1 Tube of Mould Resistant Silicone Caulking2 2” round vent covers  Tank Construction Tank consists of 7 Panels. Panels are all 2 ¼” thick. All Interior pieces will be ¼”plywood (blue pieces). All Exterior pieces will be ½” plywood. Make sure 2 x 2’s are1 ½” by 1 ½”.Bottom Panel, Left Side Panel, Right Side Panel, Back Panel, Top Panel,Lower Front Panel and Door Panel.This tank was finished with tongue and groove Cedar. I floated with my head to the back opposite the door.   Bottom Panel (floor) ½” plywood 47”   95” Cut sheet of ½” plywood to 95” by 47”¼” plywood  Styrofoam 2 x2’s42 ½”Styrofoam   94” Cut sheet of ¼” plywood to 94” by 42 ½”. Screw 2 by 2’s to outside edges and throughcenter of ¼” plywood. Cut Styrofoam to fit.Screw to ½” plywood leaving ½” lip top and bottom and 2 ¼” lip on both sides.  Left Side and Right Side Panels  66 ¼”  ½” plywood 48”   21”   95” Cut 2 sheets of ½” plywood to 95” by 48”…Measure 66 ¼” at top and 21” from bottomon left side and cut.   2 x 2”s65 ¾”¼” plywood48”21 ½” 19” to center   94” Cut 2 sheets of 1/4” plywood to 94” by 48”…Measure 65 ¾” at top and 21 ½” frombottom on left side and cut. Screw 2 by 2’s to outside edges of both sheets of ¼”plywood making sure ¼” sheet will be on the inside of tank(these 2 panels will be exactopposite). Measure 19” from bottom. This will be center of middle 2 x 2. Locate it hereso there will be backing for liner. Cut Styrofoam to fit.Screw to ½” plywood making it flush top and bottom and ½” lip on both sides . It will beflush on angle. *MAKE SURE THESE 2 PANELS ARE EXACT OPPOSITE.
Search Related
Previous Slide

KPRWT GERONTIK (1)

Next Slide

Burn Mangement

We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks