Dynamate MSDS June 30 2

Please download to get full document.

View again

of 7
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.


Document Related
Document Description
MATERIAL SAFETY DATA SHEET DYNAMATE® Page 1of 7 I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION DYNAMATE® Potassium Magnesium Sulfate Inorganic Salt Potassium Magnesium Sulfate, SPM, Langbeinite Sulfate of Potash Magnesia Sul-Po-Mag® K 2 SO 4 · 2MgSO 4 Feed Ingredient Mosaic USA LLC 3033 Campus Drive Plymouth, MN 55441 8:00 am - 4:00 pm Central Time, Mon - Fri: 800-323-5523 Product Name: Chemical Name: Chemical Family: Synonyms: Chemical Formula: Primary Use: Responsible Party: Non-Emergency T
Document Share
Document Tags
Document Transcript
   MATERIAL SAFETY DATA SHEET DYNAMATE  ®    Page 1of 7I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: DYNAMATE  ®    Chemical Name: Potassium Magnesium Sulfate Chemical Family: Inorganic Salt Synonyms: Potassium Magnesium Sulfate, SPM, LangbeiniteSulfate of Potash MagnesiaSul-Po-Mag  ®    Chemical Formula: K 2 SO 4 · 2MgSO 4   Primary Use: Feed Ingredient Responsible Party: Mosaic USA LLC3033 Campus DrivePlymouth, MN 55441 Non-EmergencyTechnical Contact: 8:00 am - 4:00 pm Central Time, Mon - Fri: 800-323-5523 EMERGENCY OVERVIEW24 Hour Emergency Telephone Number:For Chemical Emergencies:Spill, Leak, Fire or AccidentCall CHEMTRECNorth America: (800) 424-9300Others: (703) 527-3887 (collect) Health Hazards: Irritant. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Physical Hazards: None known Physical Form: Solid Appearance: White and pink to gray, crystalline or granular Odor: None NFPA HAZARD CLASS __  Health: 1 (Slight)Flammability: 0 (Least)Instability: 0 (Least)Special Hazard: None  HMIS HAZARD CLASS ______   Health: 1 (Slight)Flammability: 0 (Least)Reactivity: 0 (Least)PPE: Section VIII Status: Revised MSDS Issue Date: June 30, 2009Revised Section: All MSDS Number: MOS100080    MATERIAL SAFETY DATA SHEET DYNAMATE  ®    Page 2 of 7II. COMPOSITION/INFORMATION ON INGREDIENTSComponent % Weight Exposure Guideline Potassium Magnesium Sulfate(Langbeinite)CAS No. 14977-37-888 - 99.5 NE OSHAACGIHAllSodium ChlorideCAS No. 7647-14-50.5 - 12 NE OSHAACGIHAllNE = Not established, but the following particulate limits apply to all inert inorganic dusts.Particulates Not Otherwise Classified (PNOC) 10 mg/m 3  3 mg/m 3  ACGIHACGIHTWA - InhalableTWA - RespirableParticulates Not Otherwise Regulated (PNOR) 15 mg/m 3  5 mg/m 3  OSHAOSHATWA - Total DustTWA - RespirableNotes: State, local or other agencies or advisory groups may have published more stringent limits. Consult an industrialhygienist or similar professional, or your local agencies, for further information.   III. HAZARDS IDENTIFICATION POTENTIAL HEALTH EFFECTSEye: Contact may cause mild eye irritation including stinging, watering and redness. Skin: Contact may cause mild irritation including redness and a burning sensation. No harmfuleffects from skin absorption have been reported. Inhalation(Breathing): No information available. Studies by other exposure routes suggest a low degree of hazardby inhalation. Ingestion(Swallowing): Low to moderate degree of toxicity by ingestion. Signs andSymptoms: Effects of overexposure may include irritation of the nose, throat and digestive tract, nausea,vomiting, diarrhea, abdominal cramping, irregular heartbeats (arrhythmias), dehydration, andhypertension. Cancer: Inadequate data available to evaluate the cancer hazard of this material. Target Organs: No data available. Developmental: Inadequate data available for this material. Other Comments: To the best of our knowledge, the chemical and toxicological properties of potassiummagnesium sulfate have not been thoroughly investigated. Pre-ExistingMedical Conditions: Respiratory diseases (asthma-like disorders) and high blood pressure (hypertension). Status: Revised MSDS Issue Date: June 30, 2009Revised Section: All MSDS Number: MOS100080    MATERIAL SAFETY DATA SHEET DYNAMATE  ®   Page 3 of 7   IV. FIRST AID MEASURES Eye: If irrigation or redness develops, move victim away from exposure and into fresh air. Flush eyeswith clean water for at least 15 minutes. If symptoms persist, seek medical attention. Skin: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by washingwith mild soap and water. If irritation or redness develops and persists, seek medical attention. Inhalation(Breathing): If respiratory symptoms develop, move victim away from source of exposure and into fresh air. Ifsymptoms persist, seek medical attention. If victim is not breathing, clear airway andimmediately begin artificial respiration. If breathing difficulties develop, oxygen should beadministered by qualified personnel. Seek immediate medical attention. Ingestion(Swallowing): If swallowed, seek emergency medical attention. If victim is drowsy or unconscious andvomiting, place on left side with the head down and do not give anything by mouth. If victim isconscious and alert and ingestion occurred within the last hour, vomiting should be induced foringestion of large amounts (more than 5 ounces or a little more than 1/2 cup in an adult)preferably under direction from a physician or poison center. If possible, do not leave victimunattended and observe closely for adequacy of breathing. Note to Physicians: None known V. FIRE FIGHTING MEASURES FlammableProperties:DYNAMATE  ®  is non-flammable .Flash Point - Not applicable OSHA Flammability Class - Not applicableLEL/UEL - Not applicable Auto-ignition Temperature - Not applicable Unusual Fire &Explosion Hazards: None known ExtinguishingMedia: Use extinguishing agent suitable for type of surrounding fire. Fire FightingInstructions: Positive pressure, self-contained breathing apparatus is required for all fire fighting activitiesinvolving hazardous materials. Full structural fire fighting (bunker) gear is the minimumacceptable attire. The need for proximity, entry, flashover and/or special chemical protectiveclothing (see Section VIII) needs to be determined for each incident by a competent fire fightingsafety professional.Water used for fire suppression and cooling may become contaminated. Discharge to sewersystem(s) or the environment may be restricted, requiring containment and proper disposal ofwater. Status: Revised MSDS Issue Date: June 30, 2009Revised Section: All MSDS Number: MOS100080    MATERIAL SAFETY DATA SHEET DYNAMATE  ®    Page 4 of 7VI. ACCIDENTAL RELEASE MEASURES DYNAMATE  ®  is a naturally-occurring feed nutrient. Potassium magnesium sulfate is also a crop nutrient and plant foodhowever; large spills can harm or kill vegetation.  Stay upwind and away from spill (To avoid potential dust exposure).  Wear appropriate protective equipment including respiratory protection as conditions warrant (see Section VIII).  Prevent spilled material from entering sewers, storm drains, other unauthorized treatment drainage systems, andnatural waterways.  Notify appropriate federal, state, and local agencies as may be required  Minimize dust generation.  Sweep up and package appropriately for disposal.   VII. HANDLING AND STORAGE Handling: The use of appropriate respiratory protection is advised when concentrations exceed anyestablished exposure limits (see Sections II and VIII). Wash thoroughly after handling. Washcontaminated clothing or shoes. Use good personal hygiene practices. Storage: Stable under normal storage conditions. VIII. EXPOSURE CONTROLS/PERSONAL PROTECTION EngineeringControls: If current ventilation practices are not adequate to maintain airborne concentrations below theestablished exposure limits (see Section II), additional ventilation or exhaust systems may berequired. Respiratory: A NIOSH approved air purifying respirator with a type 95 (R or P) particulate filter may be usedunder conditions where airborne concentrations are expected to exceed exposure limits (seeSection II). Protection provided by air purifying respirators is limited (see manufacturer'srespirator selection guide). Use a positive pressure air supplied respirator if there is potential foruncontrolled release, exposure levels are not known or any other circumstances where airpurifying respirators may not provide adequate protection. A respiratory protection program thatmeets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed if workplaceconditions warrant a respirator. Personal Protective Equipment (PPE)Skin: The use of cloth or leather work gloves is advised to prevent skin contact; possible irritation andabsorption (see glove manufacturer literature for information on permeability). Eye/Face: Approved eye protection to safeguard against potential eye contact, irritation, or injury isrecommended. Other PPE: A source of clean water should be available in the work area for flushing eyes and skin.Impervious clothing should be worn as needed. Status: Revised MSDS Issue Date: June 30, 2009Revised Section: All MSDS Number: MOS100080
Search Related
Previous Slide


We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks